Installation

A key point with installing FTI cellulose insulation is that there is no “off-gassing” during the installation process. Thus, there are no concerns to the installer or future occupant about harmful emissions. Also, when FTI cellulose insulation is installed into a wall cavity of a new structure, it is filled to the full depth of the cavity. Thus, there are no chances for gaps or voids that may occur with poorly installed fiberglass batts. Also, there is no chance of convection issues that may occur with partially-filled spray foam insulation products.

The following technical bulletins provided by the Cellulose Insulation Manufacturers Association (CIMA) will provide more detail on the most effective methods for installing cellulose insulation.

CIMA Technical Bulletin #1
Cellulose Insulation in the ICC International Codes
(Updated: 12/98)
Cellulose Insulation in the ICC International Codes

CIMA Technical Bulletin #2
Standard Practice for Installing Cellulose Building Insulation
(Updated: 12/98)
Standard Practice for Installing Cellulose Building Insulation

CIMA Technical Bulletin #3
Standard Practice for Installation of Sprayed Cellulosic Wall Cavity Insulation
(Updated: 12/98)
Standard Practice for the Installation of Sprayed

CIMA Technical Bulletin #4
Replaced by ASTM Standard Designation C-1497 available at www.astm.org
(Published: 3/2000)
www.astm.org

CIMA Technical Bulletin #5
Guide for Installation of Cellulosic Fiber Stabilized Thermal Insulation
(Published: 3/2001)
Guide for Installation of Cellulosic Fiber

CIMA Technical Update #1
Cellulose Insulation in IECC 2000
(Published: 3/2001)
Technical Update: Cellulose Insulation in the ICC International Codes

Manufacturers Certification
FTI’s cellulose insulation qualifies for Energy Tax Credit under the American Recovery and Reinvestment Act 2009.
Technical Update: Cellulose Insulation in the ICC International Codes